Filter products
Description
Brands
Position
Your vehicle details
Make: Toyota
Model: MR2
Engine: 2.0000
Year: 1990
Fuel: petrol
Please note this is for guidance only
Please phone 01392 215635 for availability.
CV JOINT BOOT KIT
This First Line CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| Fitment | Bellow Kit, driveshaft |
|---|---|
| Size mm | 3SGE, 3SFE, 3S |
| Part Note | 119 |
| Note | L.: 110 |
| Vehicle Detail | With grease lubrication |
| Engine Code | With Clamps |
CV JOINT BOOT KIT
£43.39
£36.16
new
In Stock
Boot Kits
This Shaftec CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Bellow Set, drive shaft |
|---|---|
| Fitment | 3SGE, 3SFE, 3S |
| Part Detail | 119 |
| ABS No of Teeth | Part Status:Yes |
| Material Type | L.: 87;Inner Dia.1: 24;Inner Dia.2: 83 |
Boot Kits
£20.30
£16.92
new
In Stock
Boot Kits
This Shaftec CV Boot Kit fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Bellow Set, drive shaft |
|---|---|
| Fitment | 3SGE, 3SFE, 3S |
| Part Detail | 119 |
| ABS No of Teeth | Part Status:Yes |
| Material Type | L.: 90;Inner Dia.1: 24;Inner Dia.2: 83 |
| Engine Detail | Version: Universal Cone,Fitting Boot |
Boot Kits
£22.03
£18.36
new
Shaftec CV Joint (Rear Outer)
JCV988AN
Low Stock
CV Joints
This Shaftec CV Joint fits the following vehicles
- MR2 2.0 SW20 04/90-12/92
| OE System | Joint Kit, drive shaft |
|---|---|
| Fitment | 3S, 3SFE, 3SGE |
| Part Detail | 119 |
| ABS No of Teeth | New Part;with retaining ring rear side;Part Status:Yes |
| Material Type | ABS Ring Dia.: 89;L.: 162;Dia.: 90;Thread Size: M22 x 1.5;Seal Dia.: 56 |
| Axle Info | No. of Teeth, ABS Ring: 48;Internal Teeth, wheel side: 25;Outer gearing wheel side: 26 |
CV Joints
£108.52
£90.43
new
CV Boots & Joints & Drive Shafts
We can supply the best CV Boots & Joints & Drive Shafts for your Toyota MR2